Introduction of ZW016C type loose and tight type high speed winding machine
This machine for compact yarn production cone type, for needle loom, weaving machine, warping machine, hosiery machine use. The winding speed of the machine can be controlled automatically through the computer, up to 1100 M / min. The control of radial anti aliasing device is convenient. Advanced yarn clearing and tension mechanism with photoelectric yarn to avoid yarn winding. The precision and sensitivity of the device can be used to ensure that the length (weight) of the winding is uniform. Electric rotating waxing device can meet the needs of the yarn and the uniformity of the amount of wax. It’s the perfect machine for rewinding ,separate tube yarn (cotton, hemp, silk and chemical fiber yarn )
Main features:
1 durable metal mandrel holder
2 easy to open the bobbin bracket center positioning structure, easy to remove the bobbin winding.
3 the inlet and outlet of the yarn has ceramic protection, it can avoid the weight of the yarn due to friction.
4 groove tube with dust, anti winding device, can prevent the accumulation of dust, to protect the rotating bearing.
5 double-sided arrangement of spindle, each section 12 spindles, can be more than one series installation, up to 9 knots for a (108spindles)
6 rotating pin type and weight type yarn brake freely controlling winding tension.
7 spring bracket pressure balancing device, can make the winding start to the end of the uniform winding density.
8 electric rotary device to ensure uniform waxing waxing.
9 Holzer component electronic length measuring device, to ensure that the number of spindles of the spindle is exactly the same.
* user set:
1. Special bobbin center positioning device for
2. Diameter 95mm grooved drum for winding various yarn type
3. Suspension type automatic air splicer.
4.The empty bobbin recovery conveying belt device.
5. Clear uniform wax knife gate device.
6. Electronic clean yarn system
|
|
技術特點tec features |
絡筒機技術參數Technical parameters of winding machine |
|
松式槽筒 loose tube |
O/D82mm，節距pitch2.5，對稱型symmetrical type ( 0°) |
|
緊式槽筒 tight tube |
O/D82mm，節距pitch2.5，非對稱型asymmetrical type |
|
成型筒子 松式forming bobbin ( loose ) |
0°圓柱型cylindrical，或圓臺型round table3°30’，4°20’ |
|
成型筒子 緊式forming bobbin ( tight ) |
0°、3°30’、4°20’、5°57’、9°15’（僅限于膨脹錠子only expansion spindle） |
|
自動定長automatic length |
根據成品件，電子設定卷繞長度，最長可達999999米 according to the product , it can set the winding yarn length , maximum length 999999 meter. |
|
慢速啟動功能 slow start function |
保證平穩啟動，提高卷繞質量ensure a smooth start, improve the quality of winding |
|
配重式紗線制動器weight type yarn brake |
可防止紗線在喂入時出現抖動，提供合適卷繞張力prevent yarn jitter in feed, provide appropriate winding tension |
|
電動式上蠟裝置Electric waxing device |
可放入方孔蠟塊，并有重力片，每錠一套均勻上蠟 put into square hole wax, and gravity, each spindle uniform waxing |
|
清結調節器 cleaning regulator |
可方便調節清結刀門間隙 it can rasy to cleaning and regulate the distance of knife gete. |
|
橫動軟邊 traversing gear |
每節獨立電機驅動，橫動量可調each independent motor drive, the transverse momentum can be adjusted |
|
配置 set |
每節12錠each section of 12 spindles |
|
驅動方式Drive mode |
每錠配一長軸直流無刷電機，可單錠調速，整體調速with a long shaft of the brushless DC motor, can be a single spindle speed, the overall speed. |
|
最高速度Maximum speed |
1100米/分鐘，每面卷繞均可獨立設置1100 M / min, each side can be set up independently. |
|
導紗動程traverse range |
松式標配147mm兼有142mm; 緊式標配152mm loose parts 147mm,also have 142mm. tight parts 152mm. |
|
紗架平衡器yarn stand balancer |
彈簧平衡調節卷繞壓力 spring balance adjustment winding pressure |
|
紗線探測器yarn prober |
帶光學傳感器 optical sensors |
|
筒紗最大直徑 bobbin max diameter |
250mm |
|
啟動 / 停止并帶大按鈕開關ON/OFF button switch |
單錠薄膜開關控制，LED實時顯示卷繞米數，車頭液晶屏單面總控Single spindle film switch control, LED real-time display of the number of meters, the front side of the liquid crystal screen one side of the total control. |
|
徑向防疊裝置radial preventing stack |
電腦控制徑向防疊參數設定 computer control radial preventing stack setting parameters |
|
往復吹吸清潔器 round blowing and suction cleaner |
1100W(清潔器功率)power |
|
消耗功率power consumption |
40W/錠 (最高速度)，加清潔器電機功率 40w/spindle(max speed), and cleaner power |
|
電源current source |
三相three-phase power 400V+/-10% , 50/60Hz |
|
12錠主機重量/尺寸 the weight /size of 12 spindle |
350kg 2108mm(長length)*950mm(寬wide)*1500mm(高high) |
|
吸塵器重量/尺寸 the weight /size of cleaner |
125kg 根據錠數確定according to the quantity of spindle |
|
車頭電控箱重量/尺寸the weight/size of electric control box |
35kg 700 mm(長length)*300mm(寬wide)*1350mm(高high) |
|
